KERN & SOHN KFE-TM - Manual (Page 21)

KFE-TM-BA_IA-e-1313 21
3. How to set tolerance weighing mode
 Press
repeatedly until is displayed.
 Acknowledge with .
 Press
repeatedly until BEEP is displayed.
 Press and current setting will be displayed.
 Select desired setting (bp 1, bp 2, bp 3) with
and
confirm by pressing .
 Press
repeatedly to exit menu. The weighing system is
in tolerance weighing mode, i.e. from here occurs the
graduation if the weighed material is within the two tolerance
limits.
4. Weighing with tolerance range
 Tare when using a weighing container
 Put on goods to be weighed, tolerance control is started
Load below specified
tolerance Load within specified
tolerance Load exceeds specified
tolerance
The indicator [LO] is
displayed The indicator [OK] is
displayed The indicator [HI] is
displayed
The tolerance control is not active when the weight is under 20d.
To delete limits, enter “00.000 kg“.