KERN & SOHN KFE-TM - Manual (Page 26)

26 KFE-TM-BA_IA-e-1313
8 Menu
8.1 Navigation in the menu
Call up menu
 In weighing mode press and at the same time
and the first menu block will appear.
Select menu block
 With help of
, the individual menu blocks can be
selected one after the other.
Select setting
 Confirm selected menu item by pressing . The
current setting will be displayed.
Change settings
 To change to the available settings, press the
navigations keys as described in chpt. 2.1.1.
Acknowledge setting /
exit the menu
 Either save by pressing or cancel by pressing .
Return to weighing
mode
 Press repeatedly to exit menu.
8.2 Overview
Menu block Menu item Available settings / explanation
Weighing with
tolerance range
SET Lo Upper limit value, input see chapter 7.6
(factory setting 000.000)
SET Hi Lower limit value, input see chapter 7.6
(factory setting 000.000)
to Clr Not documented
to P-C Not documented
to Prt Not documented
Weighing Units
Factory setting „kg“, no further units available.
Date/time
SET dA Set date
Press and the currently set date (yy.mm.dd)
will be displayed. To make changes, press the
navigation keys as explained in chpt. 2.1.1.
SET ti Set time
Press and the currently set time (hh.m.ss) will
be displayed. To make changes, press the
navigation keys as explained in chpt. 2.1.1.