KERN & SOHN KFE-TM - Manual (Page 22)

22 KFE-TM-BA_IA-e-1313
7.7 Manual totalizing
With this function the individual weighing values are totalized into the sum memory
by pressing .
Menu settings:
„F5 Prt“  „P prt“, see chap. 8.2
“P4 CHk“  „mode 1“, see chap. 11.4
The totalizing function is not active when the weight is under 20d.
Add up:
 Place weighing goods A.
Wait until the stability display STABLE appears, then press . The weighing
value is saved.
 Remove the weighed good. More weighed goods can only be added when the
display ≤ zero.
 Place goods to be weighed B.
Wait until the stability display appears, then press . The weighing value is
added into the summation memory. Number of weighing, followed by the total
weight will be displayed for 2 sec.
 Add more weighed goods as described before.
Please note that the weighing system must be unloaded between the individual
weighing procedures.
 You can repeat this process 99 times until the capacity (max) of the weighing
system is exhausted.
Display of the saved weighing data:
 When zero is displayed press
, the number of weighings followed by the total
weight will be displayed for 2 sec.