LABEC AA-17BS - Manual (Page 8)

Operation manual
SEA Series Steam Sterilizers
The power supply must be able to afford 1800VA, and grounded correctly.
Tips: Before starting the Autoclave, please check the local atmospheric pressure. If the pressure is lower than
0.095 Mpa (or the Altitude is higher than 500 meters), you will need to contact your distributor who should reconfigure
the controller for the device.
Caution
4
Prepare the machine before use
We have installed the in the chamber(Fig3-3).
You should clean the when use the
autoclave for a long while. The instruction shows you how to
clean it. Please refer to P16.
draining filter
draining filter regularly
Before using the device, you should make electrical
connections by using the power cord that comes with
the unit. Insert the hollowed end of the power cord in
to inlet of the machine and plug the other end on a
power outlet. Caution: The power supply can afford
1800VA load.
Ok, you can turn on the autocalve now.
Fig 3-3
Fig 3-4