LABEC M-MIA-CC - Manual (Page 63)

Ultrasonic milk analyser
Operation manual 23.08.10 61/98
Del N:aaaa
Kg=yy.yy
Are you sure?
0-No Yes-#
Now the operator has to check the data and if there is need something to be
corrected to press button “0”, which returns in the main menu for entering
deliverer’s number. By pressing the button “#” data is confirmed and following
appears on the display:
Measure:CalName
Start:Enter or *
The operator has to place the sample holder filled with milk sample in the milk
analyser and to start the measurement. The milk analyser measures the
sample and shows the results as in a normal mode. On the print out 2 new
lines appear:
Litres………..19.4
Kilograms…..20.00
Please, have in mind the formula for calculating liters from weight measured:
Litres = Kilograms / Density
where:
Density is measured by the analyser density of the correspondent sample.
When the next deliverer arrives, the operator has to press “#” and to start
again the procedure for entering deliverer’s number and weighting. In this
case weighting scales are ready for the next deliverer’s milk. This procedure
is repeated for every deliverer. When the milk-collecting vessel is full, pour its
content in the cooling tank. Place it back on the scales and press again the
button for new tare calculation.
9.8.3. Control options when working with scales.
They are entered by using the Setup of the analyser. They are started using
the following menu:
Setup ->Accessories->Weigh Scale: