Canon 800II User Manual
Page 12
Chapter 1 Installation and Basic Operation of Scanning Utility 800
12
Prints the image. (➝ P.46 “Printing the Displayed Image”)
Print Format
Actual size:
Prints the image at the size shown on the screen, regardless of the paper
used for printing or the resolution at which the image was scanned.
Fit to paper:
If the image size is larger than the paper size, this setting shrinks the
image to match the paper size. If the image is smaller than the paper
size, the image is printed at actual size.
Actual pixel:
Prints each dot in the scanned image as one dot on the printer. Accord-
ingly, the printed image is smaller when it is printed on a high-resolution
printer that prints smaller dots.
Printer setting...
Sets the printer.
Scanner setting...
Sets the scanner. (➝ P.18 “Specifying the Scanner Settings”)
Scan page
Scans the image currently shown on the screen. (➝ P.36 “Scan Page”)
Scan batch to file
Scans an image and saves the image to the specified file. (➝ P.38 “Scan Batch to File”)
Scan batch to printer
Scans an image and then prints the image on the printer currently set as the “Normally
used printer”. (➝ P.43 “Scan Batch to Printer”)
Cancel Scan
Cancels the current scan.
Select scanner...
Selects the scanner to be used.
Converter mode
Scans an image and then saves the image to the specified folder with the film address as
the file name or folder name. (➝ P.48 “Converter Mode”)
ReaderPrinter Emulation Mode
This is a mode in which the Scanning Utility 800 software emulates the scanner’s
ReaderPrinter mode and prints the image shown on the screen directly to the printer
connected to the computer. (➝ P.50 “ReaderPrinter Emulation Mode”)
Exit
Exits Scanning Utility 800.
07.2.28, 19:35
Page 12