Canon 800II - Manual (Page 34)

Chapter 2 Specifying the Scanner Settings
34
[Margin Scanning]
Scans the margins when an image is scanned.
[Adjust Margin]
Adjusts the size of the margin during scanning. When you press this key, the
display shows the margin size and you can adjust the margins through a range
from –10 mm to 10 mm either side of 0
[Adjust Sharpness]
Selects the level of sharpness (edge enhancement) during scanning. When you
press this key, the display shows the level of sharpness. Select any of 5 levels
from 1 to 5.
[Skew Correction]
Corrects skewed images during scanning so that images are scanned straight.
[Overlay Scanning]
When you press this key, the 2 images in the A and B positions on duplex film are
scanned for output as a single image with one image positioned above the other.
[Picture Mode]
Pressing this key switches the scan mode to [Monochrome Photo].
[600 DPI]
Toggles the scan resolution between 300 and 600 dpi. When this key is set to ON,
the image is scanned at 600 dpi. When you change the setting to OFF, the scan-
ning resolution changes to 300 dpi.
[Background Erase]
When the image mode is set to Black and White or Black and White-ED, pressing
this key automatically clears any speckling in the background of text, line draw-
ings, etc.
[Scanner]
Pressing this key switches the scanner to Scanner mode.
[Printer]
Pressing this key switches the scanner to Reader Printer mode.
[Auto Centering]
In Reader Printer mode, this option prints the scanned image in the center of the
page.
[Setting Assignment]
Stores the operation panel status and the scan settings.
3
Press the Set button to store the functions assigned to the func-
tion keys.
To assign the “Setting Assignment” option to a function key, specify
the desired scanner settings, click [OK] and close the [Detail Settings]
and [Scanner setting...] dialog boxes. Then open the Function Key
dialog box and select the key to which the settings will be assigned
and select “Setting Assignment”. Then click [Set] to store the setting.
NOTE