Canon 800II - Manual (Page 48)

Chapter 3 Using the Scanner
48
NOTE
Other Operations
Scanning Utility 800 also provides 2 additional scanning modes: Converter mode and
ReaderPrinter mode.
Converter Mode
Converter mode can be used when an FS Controller III is used as the carrier. In this mode,
file names are automatically created from the film address detected by the FS Controller III
and scanned images are saved to a specified folder.
1
Project an image onto the scanner screen.
2
Click in the Toolbar.
The Folder Select dialog box appears.
3
Specify the destination folder for the saved files and the file
type, then click [OK].
The mode switches to Converter mode.
Creating New Folders
When you want to create a new folder, enter a new folder name into
[Current Folder] under an absolute path name, and click on [Create
New] button. The number of absolute path name characters in this
case must not exceed 200.
File Types
Scanned images can be saved in the TIFF (*.tif), BMP (*.bmp), JPEG (*.jpg)
and JBIG (*.jbg) file formats. However, the displayed file types differ depend-
ing on the “Mode” scanner setting (P.20).
Scan Mode
Available File Formats
Black and White
Black and White-Fine
Black and White-Picture
Grayscale
BMP JBIG JPEG TIFF(MMR)