Canon 800II - Manual (Page 49)

49
Chapter 3 Using the Scanner
3
Using the Scanner
4
Use the FS Controller III keyboard to perform the scan.
File names for image files
If the TIFF format is selected (multi-page TIFF), a folder with the batch ad-
dress as the name (“00000003B” when the batch address is “3B”) is created
in the specified folder, and TIFF files with the file address as the name
(“00000009F.tif” when the file address is “9F”) are automatically created in
that folder. Multi-page images are then saved to those files. If the New File
function or File Separator function is used to separate files, files are automati-
cally created for each separator and the images are saved to those files.
If the BMP, JBIG or JPEG format is selected, a folder with the batch address
as the name (“00000003B” when the batch address is “3B”) is created in the
specified folder, and folders with the file address as the name (“00000009F”
when the file address is “9F”) are created in that folder. The images on each
page are each then saved as separate files in that folder. The file names are
automatically assigned in a series (“00000001P”, “00000002P”, etc.). (When
the BMP format is selected, the created file names are “00000001P.bmp”,
“00000002P.bmp”, etc.)
If the New File function or File Separator function is used to separate files,
folders are automatically created for each separator and the images are saved
in those folders.
5
When scanning is finished, select [File]-[Cancel Scan] or press
the Clear button on the FS Controller III to exit Converter mode.
When you select [File]-[Cancel Scan], the “Scanning was canceled” message
is displayed. Click [OK].
NOTE
NOTE