Levana LV-TW500 - Manual (Page 46)

46
COMMAND MENU
From this menu you can prompt a recording, apply motion detection, take a snapshot, search the
recorded footage, mute/play the sound as well as exit the software. To access this menu select
“Command” from the upper menu bar.
• To prompt any options on the command menu, open the command menu and click the
option you would like to prompt. Once a check mark appears next to the option, it will
be enabled
STEP 8 - SOFTWARE - IN DEPTH
Command Menu
VIEW MENU
The view menu allows you to check or un-check certain features of your software for you to view
when watching and working with the software. The things you can view/hide are the menu bar, the
status bar, switch to full screen view and view the log files. You can also decide if the watcher program
is always on top and restore the window size with the view menu. You can do many of these features
with icons directly on the software.
To adjust the menu bar, status bar, always on top and view full screen, open the view menu and click
the option you would like to view/adjust. Once a check mark appears next to the option, it will
be adjusted.
View Menu
Note: The above photo has a check mark next to the words “Menu Bar” and “Status
Bar,” this means that the menu and status bar are visible when the player
is open.
Note: The above photo has a check mark next to the words “Apply Motion
Detection,” this means that motion detection has been activated.