2 kvm switch installation – Longshine LCS-KL-2716M User Manual
Page 15
14
5.2 KVM SWITCH INSTALLATION
Precaution:
Please turn off computers and devices when you start to install KVM
Switch.
For computers with Keyboard Power On function, please unplug the power
cords in advance. Otherwise, the switch might not work properly.
If your computeres work under Windows 98, please connect KVM switch
to computers via PS/2 ports, because Windows 98 does not support
installation at first time as through USB HID installation driver.
Some old computers must enable USB setting in BIOS in advance to
make USB interface work.
This KVM switch does not
guarantee
to fully support USB keyboard with
USB HUB built-in itself.
5.2.1 KVM SWITCH Console connection:
Plug keyboard, mouse and monitor to the console ports on the real panel
of KVM Switch.
Console connection