Longshine LCS-KL-2716M - Manual (Page 27)

26
Channel LOCK indicator ( Status S TA )
L: Indicating this channel is locked.
BLANK: Indicating this channel is normal without locked.
Computer power on indicator ( Status S T A ), OSD menu will update
the flag automatically if the computer status is changed
A: Indicating this computer is powered on and ready to select.
BLANK: Indicating this computer is not connected or powered on.
Channel scan indicator ( Status ST A )
S: This channel is marked for auto-scan if the scan mode is Select type.
BLANK: Indicating this computer is not marked for auto-scan.
7.1.4 Current active channel number
Indicate current active channel number. The channel of the currently
selected computer is displayed in the right-upper corner.
If the active channel is in 2nd or 3rd cascade layer, the display string is like
XX-YY-ZZ. For example, 02-05-07 means the active channel is layer 1
channel 2 links to layer 2 channel 5, and layer 3 channel 7 is selected as
active channel.
7.1.5 Cascade parent channel number
Indicate the parent channel of this cascade layer. The number at the
left-upper corner below KVM layer number shows the number of port for
the upper layer, i.e. 8 means link from channel 8 of upper KVM.
It’s valid only for 2nd and 3rd cascade layer. It will show blank for 1st layer
since there is no parent channel.
7.1.6 Page down / up indicator
This is for 16-port KVM only. The information of port 1 ~ 8 are display in
the first page, and information of port 9 ~ 16 are display in the second
page. Since the port information is divide to two pages, the page down /
up indicator can remind you to switch to alternative page by using <page
down> and <page up> key.
7.1.7 Function Control Menu
The detail of control functions will be described in later sections. The list of
control functions:
F1: Set up: basic set up menu
F2: Scan: autoscan function