Longshine LCS-KL-2716M - Manual (Page 28)

27
F3: Lock: setup lock/unlock, only available when F5 Security is enabled.
F4: Rename: rename selected channel name.
F5: Security: security function and user authority settings
F6: Lock Port: PC port lock function (for administrator only)
7.2 Channel selection in OSD
7.2.1 Channel select to computer
Use the <UP> and <DOWN> arrow keys to highlight a computer and then
<ENTER> to select it and leave OSD menu. A banner with the channel
name will be shown on left-upper corner of the screen.
┬ ────┬──────
│ └
Channel Name
└────────────
Channel Number
Channel Banner (Single Layer)
7.2.2 Channel select to cascade port
A plus mark (+) showing in the left of channel name indicates that the port
is under cascade channing. Pressing <ENTER> in this channel will enter
one level down, and the screen pops up the listing of the computers of the
slave KVM.
┬ ┬ ┬ ────┬──────
│ │ │ └
Channel Name
│ │ └─────── Channel Number
│ └────────── 2 nd Layer Channel Number
└────────────── 1 st Layer Channel Number
Channel Banner (Cascade Layer)
7.2.3 Return from cascade port
After entering cascade port, press <R> will return to upper layer OSD
menu.
s
s
s
s