Longshine LCS-KL-2716M - Manual (Page 21)

20
Setup leading hot key to < Caps Lock >
< CTRL > →
→ → → < CTRL > → → → → < Caps Lock > → → → → < Enter >
Note: You can also change leading hot key by pressing <F1> in OSD main
menu. Please refer section 7.3.5 Setup in OSD – Hot Key.
6.1.3 Channel Select - Single KVM
Specific channel selection
You can select the connected computers by using the two-step Hot Key
sequence. Press <Scroll Lock> key twice (Step 1), then press key (1 to
16) and <Enter> (step 2) to select the computer you want to control.
Figure 12: Specific channel selection hot key
<Scroll Lock> → <Scroll Lock> → <1> → <Enter> or
<Scroll Lock> → <Scroll Lock> → <2> → <Enter> or
…
…
<Scroll Lock> → <Scroll Lock> → <16> → <Enter>
Note: You can also select computers in OSD menu. Move the indicator bar
to the chanel to switch by using <arrow key>, <Page Up> or <Page
Down>, then press <Enter> to select the connected computer.
Please refer section 7.2 Channel Selection in OSD.
Arrow Key Channel Shift Function
Press <Scroll Lock> twice, and press <Left Arrow> or <Right Arrow>
key to shift left/right one channel.