Longshine LCS-KL-2716M - Manual (Page 29)

28
7.3 Setup in OSD: <F1>
Please use <Up> or <Down> arrow key to select the item you want to
change, and use <Left> or <Right> arrow key to change the settings.
Press <ESC> to exit and save the setup settings.
OSD Setup
7.3.1 Scan Mode
Select:
Scan the selected channels marked with S in STA column on OSD main
menu.
PC ON:
Scan all powered on PC channels
7.3.2 Scan Time
The default scan time is 5 seconds. It can be changed up to 90 seconds
by stepping 5 seconds.
7.3.3 Banner Time
The default banner time is 5 seconds. It can be changed to 10 seconds, 15
seconds, or always on (∞).
7.3.4 Position
Menu:
Use four arrow keys to move the OSD main menu to the desired position.
Press <ESC> to save the changed menu position.