Maxim Integrated MAXQ Family Users Guide: MAXQ8913 Supplement - Manual (Page 21)

MAXQ Family User’s Guide:
MAXQ8913 Supplement
2-12
When the processor exits stop mode, program execution resumes using the previously selected clock source follow-
ing a 10-ring oscillator cycle delay plus any additional delay time required to enable the internal regulator and other
circuitry (refer to the IC data sheet for details).
• If RGSL = 1, the processor continues running from the ring oscillator indefinitely.
• If RGSL = 0, the processor continues running from the ring oscillator until the high-frequency clock source completes
its warmup count (8192 cycles for external crystal oscillator, 10 cycles for external clock input), at which point it
switches over to the high-frequency clock automatically.
Maxim Integrated