Muse Research Receptor manual v1.2 - Manual (Page 26)

2: Receptor Architecture 26 Receptor Manual
• INSERT FX:
Each of Receptor’s 16 instrument channels contains 3 “insert” effects to which you can assign any VST.
Routing buttons let you arrange these three FX in any series/parallel combination. Additionally, you can
switch their positions, copy other effects to them, and bypass any effect.
--- The different Insert FX routing options ---
• EFFECT SENDS:
Each Receptor channel has two effect sends, either of which can be configured pre or post fader. These
sends are sent to two dedicated effect bus channels as described in the next section, “Effects Bus
Channels.”
• VOLUME /PAN:
Each instrument channel has its own MIDI controllable volume and pan (or balance for stereo instruments).
Effects Bus Channels
Receptor has two dedicated stereo effects busses, each of which contains 3 ‘insert’ type effects to which you can
assign any VST. Routing buttons let you arrange these three FX in any series/parallel combination. Additionally,
you can switch their positions, copy other effects to them, and bypass any effect.
Effects busses are the ideal way to instantiate an effect (such as Reverb or Delay) that you may want to apply to
numerous instrument channels, but in varying degrees. You may route the output of each effects bus to either the
master bus or to any hardware output.
--- Effects Bus Architecture ---