Muse Research Receptor manual v1.2 - Manual (Page 3)

3 Receptor Manual
CAUTION
If Receptor is rack mounted, a standard 19-inch open frame rack must be used. Do not install Receptor in rack
that does not allow or provide for free air movement in and around the device or overheating and possible
product damage may result.
3 To reduce the risk of injury, do not allow children to operate any electrical product without close
supervision.
4 Do not use Receptor near water -- for example near a bathtub or shower, next to a sink, in a damp
basement, or near or in a swimming pool or wet location.
5 Receptor MUST be installed so that its location or mounting position does not interfere with its proper
ventilation on the sides, bottom and rear of the unit. Do not modify or obstruct any of the fans in this
product or overheating will result, possibly causing permanent damage.
6 Receptor should be located away from heat sources such as radiators, heat registers, fireplaces, stoves, or
ovens, or on top of or in between amps or other heat generating devices.
7 Receptor should only be connected to a power supply of the type described in the instructions and marked
on the product using the proper power supply cable.
8 This product, in combination with an amplifier, headphones, and/or speakers, may be capable of producing
sound levels that could cause full or partial hearing loss and/or damage other audio equipment such as
speakers. Take all necessary precautions to protect your hearing when using this or any other audio device
by ensuring that the maximum output volume of your monitoring system is kept to a safe level well below
the threshold of damage.
9 Receptor may be equipped with a polarized line plug (where one blade is wider than the other) which
ensures it can only be inserted into a polarized outlet. This is a safety feature that prevents line and neutral
from being inadvertently reversed. If you are unable to insert this plug into the outlet, do not modify the
plug. Contact an electrician to install the appropriate power outlet.
10 The power supply cord should be removed from the power outlet when not being used for extended
periods of time.
11 Care should be taken so that foreign objects or liquids are not introduced into the product enclosure
openings.
12 The product should be serviced by a qualified service person when any of the following events occur:
A. The power supply cord or the plug have been damaged;
B. Objects have fallen into or liquid has been spill into the product;
C. The product has been exposed to rain;
D. The product does not appear to be operating normally or exhibits a marked change in performance;
E. The product has been dropped or the enclosure has been damaged.
13 Do not attempt to service this product beyond what is described in the user maintenance instructions. Any
required service should be performed by qualified service personnel. Please contact the factory for your
nearest qualified service center.
14 For your personal safety and the safety of others:
A. Do not operate this or any other audio device for long periods of time at high volume levels or at a level that is
uncomfortable. Ensure your hearing is protected against inadvertent, excessive sound pressure level in your studio
or performance environment. If you experience any hearing loss or ringing of the ears consult your physician or
audiologist.
B. Take care when programming any of the synth filters, distortion programs, or filter effects contained herein using
extreme operating parameters. These actions could also produce signals which result in potentially damaging sound
levels as noted previously.