Canon CR-1 MARK II - Manual (Page 101)

7. Settings
-93-
Continued on the following page >>
2 Select the Storage Type.
To output to a DICOM storage server, select Storage Server. To export a DICOM file, select
Export (DICOM). To export a JPEG file, select Export (JPEG).
3 Select the settings for the storage.
If Storage Server is selected under Storage Type, set the Storage Name, Server AE Title, Host
Name, Port No., and SOP Class. If Export (DICOM) is selected, set the Storage Name, Storage
Directory (Folder), and SOP Class. If Export (JPEG) is selected, set the Storage Name and Storage
Directory (Folder).
4 Set the Image Compression.
Select one of the methods.
When Lossy JPEG has been selected, input a number from 1 to 100 for the JPEG Quality.
“100” represents the best image quality.
Item Function
Storage Name
Input the name using not more than 64 characters.
It is case-sensitive.
Server AE Title
Input the title using not more than 16 alphanumerics and symbols.
The backslash (\) cannot be input.
Host Name
Input the IP address or host name in 32 or less alphanumerics and
symbols.
Port No. The field accepts a number from 0 to 65535.
[Connection Check...] Click this to check the connection with the storage server.
Storage Directory
(Folder) Click [Browse...] to open the Browse For Folder screen and set the
folder where the file is stored.
SOP Class Click , and select the class from the list.
Modality The modality which corresponds to the SOP Class is displayed.
Lossless JPEG
The numeral following Lossless JPEG represents the UID of the transfer syntax.
Lossless JPEG (70): 1.2.840.10008.1.2.4.70
Lossless JPEG (57): 1.2.840.10008.1.2.4.57