Canon CR-1 MARK II - Manual (Page 27)

4. Performing studies
-19-
Continued on the following page >>
4.2.5 Worklist input
Acquire the worklist from the worklist server.
1 Display the Study Input screen.
Click the Study icon, or click [Study] > [Study F1] from the menu bar.
If a tab other than Worklist is displayed, click the Worklist tab.
The worklist matching the search conditions set in 7.5.5.3 Setting the search conditions (see
page 89) is displayed.
Study Input screen (Worklist tab)
Concerning the worklist display
Up to 100 studies can be displayed.
When the item name of the header is clicked, the sequence in which the studies are displayed can
be changed. However, this does not apply to No.
Header