Canon CR-1 MARK II - Manual (Page 68)

6. Main screen operations
-60-
6.7 Printing images
Images can be printed out using the 7.10 Print (see page 109) settings.
The available printing methods are simple printing and Easy-PhotoPrint EX.
Before printing the images, set the printing parameters.
6.7.1 Adjusting the printing parameters
Printing parameters for images can be adjusted.
The adjustment here are applied only when images are printed, and will not be applied to the parameters of
the images themselves.
When the parameters of the images themselves are to be changed, refer to 6.8 QA (see page 65).
1 Select the image.
Click the thumbnail image.
2 Display the Print Adjustment screen.
On the menu bar, click [File] > [Print Adjustment...] in this order.
Print Adjustment screen
3 Adjust the parameters.
The adjusted parameters are applied to all the images in the retinal camera mode which has been
selected.
Parameter Operation
Contrast
Any contrast level from -50 to 50 can be set.
Drag the slider or click or .
Brightness
Any brightness level from -50 to 50 can be set.
Drag the slider or click or .
Gamma
Any gamma level from -1.00 to 1.00 can be set.
Drag the slider or click or .
Hue (R)
Any hue level from -50 to 50 can be set.
Drag the slider or click or .
Hue (G)
Hue (B)