Canon CR-1 MARK II - Manual (Page 19)

4. Performing studies
-11-
Continued on the following page >>
4.2.2 Manual input
Input the study using the keyboard and mouse.
1 Display the Study Input screen.
Click the Study icon, or [Study] > [Study F1] from the menu bar.
If a tab other than Manual Input is displayed, click the Manual Input tab.
Study Input screen (Manual Input tab)
2 Input the study.
The names of the items which have been set as Essential Data (see page 83) are indicated in blue.
However, if the Patient Name has been set as an Essential Data, only Last Name and/or First Name
will be displayed in blue.
In items where the input format (see page 84) was set, input text of the character type or specific
character set.
Item name No. of characters Description
Patient ID Not more than 64 characters
The backslash (\) cannot be input.
Characters other than the preset specific
character set (see page 76) cannot be
input.
Results organized based on the input
format (see page 84) settings are
displayed with square brackets [ ] at the
right of the input item field.
Accession No. Not more than 16 characters
Last Name
The total for these items must
not be more than 60
characters. Separate each
item with “^”.
The backslash (\) and equal sign (=)
cannot be input.
Characters other than the preset specific
character set (see page 76) cannot be
input.
If the patient name has been set as an
Essential Data, an error will result unless
at least one form of the name is input.
First Name
Middle Name
Prefix
Suffix
Birth Date
How this is input depends on the birth
date input setting (see page 83).
Sex Select either Male, Female or Other.
Ethnic Group Click and select the Ethnic Group.