Canon CR-1 MARK II - Manual (Page 66)

6. Main screen operations
-58-
6.6 Stereo view
Two images that were taken in the same shooting mode are displayed side by side.
1 Select the images.
Select the two thumbnail images by clicking them while holding down the Ctrl key on the keyboard.
2 Open the Stereo View.
Click [Stereo View] in the toolbar, or click [View] > [Stereo View] from the menu bar.
Images cannot be taken while the Stereo View screen is being displayed.
Stereo View screen
3 Adjust the image.
Use the image operation icons and image toolbar to adjust the images.
Image operation
icon/button
Name Function
<- ->
Select this item to switch the right and left
images.
Move/Apply Effects to
Both Images
This function is enabled when the Stereo
View screen is opened.
When operation such as moving the
displayed area, zoom in/out or changing the
magnification rate is performed on the left
image, the same effect that was applied to
the left image is also applied to the right
image. Operations are performed
independently on the right and left images
when this function is disabled.
Contrast/Brightness
6.3.3 Contrast/brightness adjustment
(see page 50)
Reset Contrast/
Brightness