OmniSistem SC 1216 User Manual

Page 13

Advertising
background image

 

SC 1216 Plus Manual 

 

2009‐10‐01 

PLAYBACK 

 
There are three modes in which you can run scenes and chases: MANUAL mode, AUTO mode, and MUSIC mode. 
 

MANUAL MODE: 

 
           1) While the unit is powered on, manual mode is automatically started. 
           2) Check and verify both the Auto and Music LEDs are off.    
           3) Use the BANK up/down arrow buttons to select the bank with the scenes you wish to run. 
           4) Press the scene button corresponding to the scene you wish to display. 
 
RUNNING CHASES IN MANUAL MODE: 
 
           1) While the unit is powered on, manual mode is automatically started. 
           2) Select the chase you wish to run by pressing the corresponding chase button. Pressing this button a second 
                time will unselect the chase. 
 

AUTO MODE: 

 
This function allows you to run a bank of programmed scenes in sequence. 
 
           1) Press the AUTO/DEL  button to activate auto mode. The Auto LED will light indicating the Auto mode is active. 
           2) Use the BANK up/down button to select a bank of scenes to run. 
           3) After selecting the bank of scenes to run, you can use the speed slider and Fade Timer Slider to adjust the speed 
               of the scene progression. 
           4) You can use the TAP/DISPLAY button to set the speed instead. The amount of time between the last two taps 
                will instruct the controller in the length of time between steps. This setting will stay in effect until the speed 
                slider is moved. 
           5) Press the AUTO/DISPLAY button to exit Auto mode. 
 
RUNNING CHASES IN AUTO MODE: 
 
           1) Press the AUTO/DEL button to activate Auto mode. 
           2) Select the desired by pressing one of six Chase buttons.  
                Pressing the button a second time will negate the selection. 
           3) Use the speed slider and Fade Time Slider to adjust the chase to your specifications. 
 

MUSIC MODE: 

 
           1) Press the MUSIC/BANK COPY button to activate Music mode. 
           2) Use the BANK up/down arrow buttons to select a bank of scenes you wish to run. The scenes selected will run 
               through sequentially to the beat of the music identified by the built‐in microphone.    
           3) Tap the MUSIC/BANK COPY button again to exit Music mode. 
 
RUNNING CHASES IN MUSIC MODE: 
 
           1) Press the MUSIC/BANK COPY button to activate Music mode. 
           2) Select the desired chase by pressing one of six chase buttons. This will activate the chase and cause it to 
                respond to the rhythms of the music. 

Advertising