OmniSistem SC 1216 - Manual (Page 8)

SC 1216 Plus Manual 2009‐10‐01
COPY SCANNER SETTINGS:
This setting allows you to copy the settings of one scanner to another.
1) Press and hold down the scanner button you wish to copy.
2) While holding down that button, tap the button of the scanner you wish to copy the settings to.
COPY A SCENE:
1) Enable program mode.
2) Tap the BANK up/down button to select the bank containing the scene you wish to copy.
3) Select the scene you wish to copy by pressing its scene button.
4) Using the BANK up/down button select the bank you wish to copy the scene to.
5) Tap the MIDI/REC button.
6) Tap the scene button you wish to copy the scene to.
DELETING A SCENE:
1) Enable program mode.
2) Press the desired scene button to select the scene you with to delete.
3) Press and hold down the AUTO/DEL button. While holding the button, tap the scene button that corresponds
with the scene you wish to delete.
4) When the programmed scene is deleted, all DMX channel values will be set to 0.
DELETING ALL SCENES:
1) With the unit removed from all power sources, press and hold down the PROGRAM and BANK down arrow
button at the same time.
2) Return the unit to power sources and power on. All scenes should be cleared.
COPY A BANK OF SCENES:
1) Enable program mode.
2) Tap the BANK up/down button to select the bank you wish to copy.
3) Tap the MIDI/REC button.
4) Tap the BANK up/down button to select the bank you wish to copy to.
5) Tap the MUSIC/BANK COPY button, all LEDs will briefly flash three times indicating the function is complete.
6) Press the program button for three seconds to exit program mode.