OmniSistem SC 1216 - Manual (Page 4)

SC 1216 Plus Manual 2009‐10‐01
IMPORTANT SAFETY INFORMATION
 This unit is intended for indoor use only.
 Ensure the power source is of the correct voltage for this fixture. Connect power through a direct switch circuit,
NOT a dimmer or variable circuit source.
 Disconnect unit from power when not in use.
 Do not install or operate the device in harmful environment conditions.
(i.e. extreme heat, cold, moisture or dust)
 If the unit has been exposed to extreme environmental conditions or drastic temperature fluctuations,
ensure the unit is returned to room temperature before operating.
 Maximum Ambient Temperature is 113° C (45° C). Do not operate unit at temperatures higher than this.
 Do not aim smoke or bubble effects near unit.
 Do not operate the unit during thunderstorms.
 Disconnect power prior to cleaning unit.
 Do not use solvents or abrasive cleaners to clean the unit. Use a damp cloth only.
 Do not leave this device running unattended.
 Modification(s) to the device or power cord will result in termination of the dealer/manufacturer’s warranty.
 The safest way to disconnect your power cord from main power is to grip cord end and detach from plug.
 There are no serviceable parts inside this device. Maintenance and service operations are only to be carried out
by authorized dealers.
 Contact the nearest dealer or service center for assistance with operating your unit. Unauthorized tampering
can cause additional damage. All units opened by an unauthorized user will not be covered under warranty.
 Damages caused by the disregard of this user manual or by unauthorized personnel are not subject to warranty.