Talkswitch TS-600 - Manual (Page 19)

W W W.T A L K S W I T C H . C O M 1 5
T S - 6 0 0 U S E R G U I D E
DO NOT DISTURB
You can enable Do Not Disturb on your extension and you will not receive any
calls at that extension. All calls will follow the Do Not Disturb call cascade
option for your extension, such as going directly to voicemail.
To enable/disable Do Not Disturb:
1. Lift the handset or press the / button (optional).
2. Press the softkey.
3. Press the / softkey.
4. The Do Not Disturb setting of your extension will be changed. You will
receive a system confirmation of Do Not Disturb “ON”or Do Not Disturb “OFF”
RING ONCE FEATURE
The TS-600 has a useful feature for minimizing ringing noise in an office environ-
ment. The phone can be set to ring only one time. Subsequent rings will be
muted and the in-use light will flash during each ring.
To enable this feature, simply press the button while the phone is
on-hook.
SEND A CALL TO VOICEMAIL
While on a call, you may wish to send the caller to a voicemail box in order for
that caller to leave a message for someone else.
While on a call:
1. Press the softkey.
2. Enter the desired voicemail box number and press softkey
3. Hang up the call and the caller will now be able to leave a message.
CHECK VOICEMAILS
The TS-600 will indicate that you have new voice
messages in your voice in-box by flashing the
message waiting lamp.
The TS-600 will also display the number of new
voice messages you have.
O K
SE N D TO VM A I L
MUT E
D I SA B L E E N A B L E
D O N OT D I ST U R B
SP E A K E R
12/09 03:00 PM
New Voice Message 03
Pick Up Do not Disturb
Un-park Voicemail
Un-hold Paging