Talkswitch TS-600 - Manual (Page 29)

W W W.T A L K S W I T C H . C O M 2 5
T S - 6 0 0 U S E R G U I D E
FCC REGISTRATION AND REPAIR INFORMATION
Your new product has been registered with the Federal Communication Commission
(FCC). This product complies with standards in Part 68 of the FCC Rules. The FCC
requires us to provide you with the following information:
Note: the TS-600 telephone is intended for use only behind a TalkSwitch PBX.
CONNECTION AND USE WITH THE NATIONWIDE TELEPHONE NETWORK
The modular telephone outlet or jack to which the telephone must be connected
is a USOC RJ-11C or RJ-11W. The TS-600 telephone has a ringer equivalence
number (REN) of 1.9B
REPAIR INSTRUCTIONS
If it is determined that your telephone equipment is malfunctioning, the FCC
requires that it not be used and that it be unplugged from the modular outlet
until the problem has been corrected. Repairs to the telephone equipment can
only be made by the manufacturer or its authorized agents or by others who
may be authorized by the FCC. For repair procedures, follow instruction outlined
under the “Limited Warranty”.