Talkswitch TS-600 - Manual (Page 9)

W W W.T A L K S W I T C H . C O M 5
T S - 6 0 0 U S E R G U I D E
SETTING UP YOUR TS-600 PHONE
1. Press the button to configure the phone.
The menu screen will be displayed.
2. You can use the
S button or the T button to
move the selection indicator up or down, and press
the button to select an option.
Alternatively, you can just press a digit to select
the corresponding option.
3. If you made a mistake during telephone set up procedures, press the
button. Set up procedure is terminated and the idle state screen
will be displayed.
CONFIGURE AREA CODES
If you enter your local area codes, Caller ID number
can be dialed correctly in North America. If you dial
your local calls using 7 digits (e.g., 555-1212), you
need to enter your area code for 7-digit dialing.
Otherwise, enter up to 3 area codes for 10-digit local
dialing. To enter area codes:
1. Press the button followed by .
2. If you dial your local calls using 7 digits (e.g., 555-1212), then press to
enter your local area code.
3. If you dial your local calls using 10 digits (e.g., 303-555-1212), press to
enter up to 3 area codes for 10-digit dialing.
4. If you use this phone in an area where the caller’s number can be dialed
without modification, do not enter any area code. Caller’s number will be
dialed as it is received. If you enter an area code by mistake, use the W button
to delete an area code.
5. If you enter any area code, caller’s number will be displayed with the North
American format (613-725-2980). If you don’t enter any area code, caller’s
number will be displayed as it is received (6137252980).
2
1
1 M E N U
G O O D BY E
D I A L / E NT E R
M E N U
MENU
Use
S/T Enter To Select
1 = Enter area codes
2 = Enter access code
3 = Select ring tone
4 = Select flash duration
MENU
Use
S/T Enter To Select
1 = 7-digit dialing
2 = 10-digit dialing