Talkswitch TS-600 - Manual (Page 20)

1 6 W W W.T A L K S W I T C H . C O M
T S - 6 0 0 U S E R G U I D E
This is shown on the display when the phone is idle.
To access your voicemail box:
1. Press the softkey.
2. Enter your password + .
ACCESSING THE CALL LOG
When you receive a call, the phone number and name of the caller appears on
the display with the day and time the call was received and is then stored in
the Call Log.
Important Note: When a new call comes in, you must let your phone ring at
least twice in order for the Caller ID information to be displayed.
Each call is assigned a call number. The most
recent call has the highest number (e.g. #99) and
the oldest call has the smallest number (e.g. #01).
VIEWING THE CALLER ID LIST
The TS-600 automatically stores the Caller ID information of the last 99 calls
received in the call log. It keeps track of all calls received, whether they were
answered or not. The oldest call in the call log is always call #1. The highest
numbered call (or call #99 if the call log is full) is always the most recent call.
If the Call log is full with 99 calls and a new call comes in, the oldest call, call
#1, is automatically deleted to make room in the log for the new call.
Press the
S button or the T button to review the Caller ID log from the oldest
and the newest call, respectively.
CALLING BACK A NUMBER FROM THE CALL LOG
To easily call back a number from the Call log:
1. Press the
S button or the T button until the number you want to call
is displayed.
2. Press the button. The number is dialed automatically.
Important Note: You need to have properly programmed your telephone with area
code, outside line access code or mode (e.g. or Direct Line Access) for this
feature to properly work.
9
D I A L / E NT E R
#
VO I C E M A I L
09/28 06:43 PM
Call log #01
480-948-4928
SMITH JOHN