On Networks N150RM User Manual User Manual
Page 12
Hardware Setup
12
N150 Wireless ADSL2+ Modem Router N150RM
You can use an Ethernet cable or connect wirelessly.
•
Use the yellow Ethernet cable to connect your computer to an Ethernet port on your
modem router.
•
Or connect wirelessly by using the preset wireless security settings on the label on
the bottom of the router.
4.
Open a browser.
The first time that you connect to your modem router, the browser automatically displays a
modem router screen to help you set up your Internet connection.
If this screen does not display, see the following section,
If you already connected to the modem router and used this screen, you are prompted to
log in. See
Log In to the Modem Router
on page 19.
5.
Connect any additional wired computers to your modem router by inserting an Ethernet
cable from a computer into one of the three remaining LAN ports.