Power led is off, Troubleshoot with the leds – On Networks N150RM User Manual User Manual
Page 63
Troubleshooting
63
N150 Wireless ADSL2+ Modem Router N150RM
Troubleshoot with the LEDs
When you turn the power on, the Power, Ethernet, and ADSL LEDs should light as described
here. If they do not, refer to the sections that follow for help.
1.
When power is first applied, the Power LED lights.
2.
After approximately 10 seconds, the Ethernet and ADSL LEDs light as follows:
a.
The Ethernet port LEDs light for any local ports that are connected.
b.
The ADSL LED lights to indicate that there is a link to the connected device.
c.
If a LAN port is connected to a 100 Mbps device, verify that the LAN port’s LED is
green. If the LAN port is 10 Mbps, the LED is amber.
Power
Ethernet
ADSL
Internet
WPS
Wireless
Figure 8. Front panel LEDs
Power LED Is Off
If the Power and other LEDs are off when your modem router is turned on:
•
Check that the power cord is correctly connected to your modem router and the power
supply adapter is correctly connected to a functioning power outlet.
•
Check that you are using the power adapter supplied in the package with this product.
If the error persists, you could have a hardware problem and should contact technical
support.