On Networks N150RM User Manual - Manual (Page 49)

Network Management
49
N150 Wireless ADSL2+ Modem Router N150RM
DHCP server . If Off, the modem router does not assign IP addresses to PCs on the LAN. If
On, the modem router does assign IP addresses to computers on the LAN.
IP Subnet Mask . The subnet mask associated with the LAN IP address.
Modem Settings
ADSL Firmware Version . The model of the hardware and the currently running firmware
version.
Modem Status
. The status of the modem connection on the DSL line.
Downstream Connection Speed . The connection speed of the ADSL connection from the
phone company to your Router.
Upstream Connection Speed . The connection speed of the ADSL connection from your
Router to the phone company.
VPI
. The VPI setting.
VCI . The VCI setting.
Wireless Port Settings
See Wireless Setup on page 25 for a more detailed description of these settings.
Name (SSID) . The Wi-Fi network name (service set ID) for the wireless network.
Region . The country where the unit is set up for use.
Channel . The current channel, which determines the operating frequency.
Mode
. The current Mbps setting.
Wireless AP . Indicates if the access point feature is enabled. If disabled, the Wireless LED
on the front panel is off.
Broadcast Name . Indicates if the modem router is configured to broadcast its SSID.