On Networks N150RM User Manual - Manual (Page 7)

Hardware Setup
7
N150 Wireless ADSL2+ Modem Router N150RM
Unpack Your Modem Router
Open the box and remove the modem router, cables, and installation guide.
The filter or
splitter provided
depends on the
region.
N150 Modem Router
Ethernet cable
Power adapter
Phone cable
Filter/splitter
Figure 1. Check the package contents
If any parts are incorrect, missing, or damaged, contact your On Networks dealer. Keep the
carton and original packing materials, in case you need to return the product for repair.
Position Your Modem Router
The modem router lets you access your network from virtually anywhere within the operating
range of your wireless network. This range can vary significantly depending on where you
put the modem router. For example, the thickness and number of walls the wireless signal
passes through can limit the range. For best results, place your modem router:
•
Near the center of the area where your computers and other devices operate, and
preferably within line of sight to your wireless devices.
• So it is accessible to an AC power outlet and near Ethernet cables for wired computers.
• In an elevated location such as a high shelf, keeping the number of walls and ceilings
between the modem router and your other devices to a minimum.
•
Away from electrical devices that are potential sources of interference. Equipment that
might cause interference includes ceiling fans, home security systems, microwaves,
computers, the base of a cordless phone, or 2.4-GHz cordless phone.
•
Away from any large metal surfaces, such as a solid metal door or aluminum studs. Large
expanses of other materials such as glass, insulated walls, fish tanks, mirrors, brick, and
concrete can also affect your wireless signal.
When you use multiple access points, it is better if adjacent access points use different radio
frequency channels to reduce interference. The recommended channel spacing between
adjacent access points is 5 channels (for example, use Channels 1 and 6, or 6 and 11).