Cary Audio Design HD Surround Sound Processor Cinema 11a - Manual (Page 18)

CONTROLS AND DISPLAYS
17
FRONT PANEL
12 1
1 2 3 4 5 6 7 8 9 10
11 13 14 15
POWER
SUR.
MODE
CES 7.1
Cinema 11a
192kHz/24 bit D/A Converter
Surround Sound Processor
AM/FM
PRO
LOGIC IIx
MASTER VOLUME
TUNER
HD RADIO PRESET NEO:6
MODE
<
<
<
>
INPUT
1 2 3 4 5 6 7 8
SETUP
ENTER
+
HDMI 1 HDMI 2 7.1 IN
1. POWER
• Press once to turn the power ON.
• Press again to turn the power OFF. The Cinema 11a will enter STANDBY and the blue
POWER LED will light.
2. BAND (AM)/(FM)
• Press this button to select between the AM & FM frequency bands.
3. BAND HDAM/HDFM (HD RADIO)
• Press this button to select between the HDAM & HDFM frequency bands.
4. PRESET
• Press this button to preset and recall desired broadcasting stations.
5. PRESET
• Press this button to preset and recall desired broadcasting stations.
6. INPUT SELECTOR
• Press one of these buttons to select the Audio input source.
7. PRO LOGIC IIx
• Press this button to select either the Pro Logic II decoding or Pro Logic IIx decoding
8. SUR. MODE
• Press this button to select the surround sound mode as a part of Dolby Digital or DTS
decoding; music or movie selections.
9.
NEO:6
• Press this button to turn the NEO:6 mode ON or OFF.
10. CES 7.1
• Press this button to select DOLBY EX AUTO, DOLBY EX ON, or DOLBY EX OFF mode.