Cary Audio Design HD Surround Sound Processor Cinema 11a - Manual (Page 23)

CONTROLS AND DISPLAYS
22
REMOTE CONTROL
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
AUTO SETUP
HDAM
HDFM
FM
AM
FM
MODE
TEXT
DISPLAY
POWER
OFF
POWER
ON
TUNER SEEK
TUNER
SCAN MEMORY
BRIGHT
EQ
ENTER
SETUP
LATE
INPUT SELECTOR
7.1 IN HDMI 1 HDMI 2 INPUT
SEEK
MUTE VOLUME
PLIIx SUR.
MODE NEO:96/24 CES 7.1
13. SURROUND/DATA FORMAT: Press the
PLIIx, SUR. MODE, NEO:96/24, or CES 7.1
button once to select a surround format.
Press the same button again to cycle
through the various processing models
available for the selected format.
14. VOLUME: Press this button to adjust the
volume up and down from –90dB to +15dB.
15. INPUT SEEK: press this button to auto
select the next active audio input source.
16. LATE (for Dolby Digital only): Cycles
through the various night dynamic range
compression modes. (Full, Half, No
compression)
17. BRIGHT: Press this button to change the
brightness of the display. (Off, Low,
Medium, High)
18. MEMORY: Press this button to store the
current broadcast band/reception frequency
into memory.
19. FM MODE: Press this button to select the
audio stereo mode or monaural mode when
listening to FM broadcast. (mono/auto
stereo)
20. TEXT DISPLAY: Press this button to start
TEXT Display on the HDFM & FM station.
21. STATION CALL: These buttons are used to
preset the desired broadcasting stations.
22. TUNER SEEK (UP/DOWN): Up: Performs tuning in ascending frequency order.
Down: Performs turning in descending frequency order.
23. POWER ON: Press this button to turn the Cinema 11a ON.