Cary Audio Design HD Surround Sound Processor Cinema 11a - Manual (Page 36)

MANUAL SOUND SETUP
35
1. Press the SETUP button to enter the SETUP MENU.
The SETUP MENU / SPEAKER appears.
2. Press the ENTER button to enter the SPEAKER setup menu.
3. Press the  button until SET CROSSOVER POINTS is selected.
The SPEAKER / Set Crossover Points menu appears.
4. Press the ENTER button to enter the SET CROSSOVER POINTS setup menu.
5. Use the  and  buttons to adjust the FL (Front Left) Crossover.
The crossover settings appear as follows as you scroll through them:
From 40 to 150 Hz in 10 Hz steps or FULL range.
6. Press the  button when you have made a selection.
Repeat step 5 for the Center, Front R, Side R, Surr BR, Surr BL, Side L and Subwoofer
speaker.
7. When you have finished adjusting the crossover points for all the speakers in your
system, select BACK to return to SETUP MENU.
8. Press the  button to select BACK and press the ENTER to return to the SETUP MENU,
or press the SETUP button to exit the SETUP MENU.
SET ACOUSTIC CALIBRATION ROOM EQ
Acoustic Calibration Equalization (EQ) is a kind of room equalizer for your speaker. It works by
measuring the acoustic characteristics of your room and neutralizing the ambient characteristics
that can color the original source material. This provides a 'flat' equalization setting. If you're not
satisfied with the automatic adjustment, you can also adjust these settings manually to get a
frequency balance that suits your tastes.
Setting the Acoustic Calibration Room EQ manually
If you have already completed automatically setting up your Cinema 11a using Auto Sound
SETUP press ENTER to restore to SETUP MENU. If you want to adjust your settings manually,
you can set the SET ROOM EQ manually following the directions below.
NOTE: The following selected menus appear on the Cinema 11a Display.
MOVIE SPK Setting
Set Room EQ
To set the Acoustic Calibration Room EQ manually:
1. Press the SETUP button to enter the SETUP MENU.
The SETUP MENU / LISTENING PROFILES appears.
2. Press the ENTER button to enter the LISTENING PROFILES setup menu.