Setup menu – Cary Audio Design HD Surround Sound Processor Cinema 11a User Manual

Page 45

Advertising

SETUP MENU

To improve AM reception, connect a 15 ft. to 18 ft. length of vinyl-coated wire to the AM LOOP

terminals without disconnecting the supplied AM loop antenna. For the best possible reception,

suspend horizontally outdoors.

ZONE 2

Cinema 11a's front panel and main remote handset can control ZONE 2 output sources and

volume control in the SETUP MENU.

- Zone 2

- Zone 2 input

- Zone 2 volume

TO SET ZONE 2 INPUT

1. Press the SETUP button to enter the SETUP MENU.

The SETUP MENU / SPEAKER appears.

2. Press the

button until INPUT is selected.

The SETUP MENU/ INPUT menu appears.

3. Press the

button until RADIO is selected.

4. Press the

button until ZONE 2 is selected.

5. Press the ENTER button to enter the ZONE 2 INPUT menu.

6. Use the

and

buttons to select the zone 2 input sources.

You can select INPUT 1, INPUT 2, INPUT 3, INPUT 4, INPUT 5, INPUT 6, INPUT 7,

INPUT 8, 7.1CH ( L & R ONLY) FM, AM, HDFM, HDAM, HDMI 1 and HDMI 2.

7. Press the

button to select GOTO MAIN MENU and press the ENTER to return to the

ZONE 2 menu, or press the SETUP button to exit the SETUP MENU.

TO SET ZONE 2 VOLUME