Cary Audio Design HD Surround Sound Processor Cinema 11a - Manual (Page 31)

AUTO SOUND SETUP
30
SBR........................... Set / N/A -15.0dB to + 15.0dB
SBL ........................... Set / N/A -15.0dB to + 15.0dB
SL............................. Set / N/A -15.0dB to + 15.0dB
SW............................ Set / N/A -15.0dB to + 15.0dB
10. Set Crossover Points
During Set Crossover Points testing, the following VFD appears on the display and checks
are made to detect the test sound in the listening room (whether there are speakers
connected to each channel or not) and the polarity of the speakers as they are
connected.
Set Crossover Points
FL ........ Full Full, 40Hz, 40Hz, 60Hz, 70Hz, 80Hz, 90Hz, 100Hz, 110Hz, 120Hz, 130Hz, 150Hz
CEN ..... Full Full, 40Hz, 40Hz, 60Hz, 70Hz, 80Hz, 90Hz, 100Hz, 110Hz, 120Hz, 130Hz, 150Hz
FR........ Full Full, 40Hz, 40Hz, 60Hz, 70Hz, 80Hz, 90Hz, 100Hz, 110Hz, 120Hz, 130Hz, 150Hz
SR ....... Full Full, 40Hz, 40Hz, 60Hz, 70Hz, 80Hz, 90Hz, 100Hz, 110Hz, 120Hz, 130Hz, 150Hz
SBR...... Full Full, 40Hz, 40Hz, 60Hz, 70Hz, 80Hz, 90Hz, 100Hz, 110Hz, 120Hz, 130Hz, 150Hz
SBL ...... Full Full, 40Hz, 40Hz, 60Hz, 70Hz, 80Hz, 90Hz, 100Hz, 110Hz, 120Hz, 130Hz, 150Hz
SL........ Full Full, 40Hz, 40Hz, 60Hz, 70Hz, 80Hz, 90Hz, 100Hz, 110Hz, 120Hz, 130Hz, 150Hz
SW....... Full Full, 40Hz, 40Hz, 60Hz, 70Hz, 80Hz, 90Hz, 100Hz, 110Hz, 120Hz, 130Hz, 150Hz
11. Set Speaker Phase
During Set Speaker Phase testing, the following VFD appears on the display and checks
are made to detect the test sound in the listening room (whether there are speakers
connected to each channel or not) and the polarity of the speakers as they are
connected.
Set Speaker Phase
FL ............................... Inphase Inphase / Outphase
CEN ............................ Inphase Inphase / Outphase
FR............................... Inphase Inphase / Outphase
SR .............................. Inphase Inphase / Outphase
SBR............................. Inphase Inphase / Outphase
SBL ............................. Inphase Inphase / Outphase
SL............................... Inphase Inphase / Outphase
SW.............................. Inphase Inphase / Outphase
Storing Measurement Results in SETUP MENU
If the Cinema 11a senses that a speaker is out of phase, the VFD will show the following
sentence:
Out PHASE SPK
___ ___ ___
The Cinema 11a can automatically adjust the speakers listed as Out of Phase to being
properly in phase and will go to the next step.
- Press ENTER restore to Setup Menu
Press the ENTER button to store all parameters including the equalizer parameters in the
SETUP MENU. If you do not want to store the calculation results in the SETUP MENU,
press the TEST button to exit.