Cary Audio Design HD Surround Sound Processor Cinema 11a - Manual (Page 41)

SETUP MENU
40
SET ANALOG IN LEVEL SETTINGS
This adjustment can be used to adjust 2-channel analog audio input levels for a selected input.
Despite attempts at standardization, analog sources still have a wide range of input levels. To
compensate for this, the Cinema 11a allows independent input level adjustment for each of the
stereo analog audio input connectors. Input level adjustment is not available for the 7.1 channel
analog audio input connector.
NOTE: The following selected menus appear on the Cinema 11a Display.
SETUP MENU
INPUTS
To set Analog IN Level:
1. Press the SETUP button to enter the SETUP MENU.
The SETUP MENU / LISTENING PROFILES appears.
2. Press the  button until INPUT is selected.
The SETUP MENU/ INPUTS menu appears.
3. Press the ENTER button to enter the CHANGE INPUT NAMES setup menu.
4. Press the  button until SET ANALOG IN LEVEL is selected.
5. Press the ENTER button to enter the INPUT 1 level adjustment menu.
6. Use the  and  buttons to adjust the level of the INPUT 1.
You can adjust the selected channel level in 1.0 dB steps across a range of -18dB to
+12dB.
7. Press the  button when you have made a selection.
Repeat steps 6 for the INPUT 2, INPUT 3, INPUT 4, INPUT 5, INPUT 6, INPUT 7 and
INPUT 8.
8. Press the  button to select BACK and press the ENTER to return to the SETUP MENU,
or press the SETUP button to exit the SETUP MENU.
SET ANALOG IN CONFIGURATION
The Cinema 11a allows analog sources to select bypass mode or DSP mode. When you select the
BYPASS mode, the Cinema 11a passes analog input signals directly to the main audio output
connectors. When you select DSP mode, the Cinema 11a sends analog input signals through A/D
conversion and internal processing before passing them to the main audio output connectors.
This allows analog sources to use bass management, speaker crossovers, speaker distance
calibration, and Room EQ.