SilentKnight 5820XL - Manual (Page 139)

Model 5820XL / 5820XL-EVS Installation Manual LS10061-001SK-E
7-31
values for the DST Start and End options reflect the August 8, 2005 DST law that goes into effect in 2007:
DST Start: The second Sunday in March
DST End: The first Sunday in November
To set the start and end for Daylight Saving Time:
1. Press the or arrow to select the week (1st, 2nd, etc.) Daylight Saving Time starts, then press ENTER
to make your selection and move to the month setting.
2. Press the or arrow to select the month (January – December) Daylight Saving Time starts, then
press ENTER to make your selection and move to the DST End option.
3. Press the or arrow to select the week (1st, 2nd, etc.) Daylight Saving Time ends, then press ENTER
to make your selection and move to the month setting.
4. Press the or arrow to select the month (January – December) Daylight Saving Time ends, then press
ENTER two times to make your selection and exit.
7.6.7 Edit Banner
The banner is the message that displays on the panel LCD when the system is normal, that is, when no alarms or
troubles exist and the system menus are not in use. A custom message of up to 40 characters can be created.
If a customize message is not created, the system will use the internal banner. You cannot change the internal
banner.
To customize the banner display message:
1. Enter the installer code. The panel will automatically go to the main menu.
2. Select 7 for Program Menu.
3. Select 5 for System Options.
4. Select 8 for Edit Banner. A screen similar to the one shown in Figure 7-19 will display.
Figure 7-19 Internal Banner Message
5. Press the or arrow to select “Custom”, then press ENTER. A screen similar to the one shown in Fig-
ure 7-20 will display.
Figure 7-20 Custom Banner Edit Screen
6. Select each letter by pressing the or arrow, then press the right arrow to move to the next character.