Solvline Eddy Series Ver 2.1a - Manual (Page 70)

Chapter 5. Configuration via Web
Figure 5-6 Eddy-CPU - GPIO Settings Page
Table 5-5 Main features for GPIO Settings
Menu Default Descriptions
Mode Output
Set current pin’s I/O mode. When in output mode, 3.3V output can
be controlled. When in input mode, any 3.3V from outside can be
detected (Options: Output, Input)
Value High
Set current pin’s output value. (This option only applies to output
mode pins)
If the value is High, 3.3V is output through the port.
(Options: High / Low)
5-10