Solvline Eddy Series Ver 2.1a - Manual (Page 77)

Chapter 6. Configuration via Telnet
Chapter 6.
Configuration via Telnet
6.1 Connection
Open your telnet client and enter Eddy’s IP address to connect. You need to enter appropriate
username and password to login. Please note that this username and password is used as
authentication method for Web as well. This means if username or/and password has been modified
from the telnet interface, modified values have to be entered to connect to web, and vice versa.
◆ Factory default username : eddy
◆ Factory default password : 99999999
Figure 6-1 Connection via Telnet
[def] command - you can view or configure Eddy’s settings
[help] command - you can see help for [def] command
After changing values, you can see modified values with ‘def view’ commands. But be careful
because these values are not in effect unless you issue a ‘def save’ command. Changes will be
discarded if you do not save current settings.
6-1