Solvline Eddy Series Ver 2.1a - Manual (Page 83)

Chapter 7. Appendix
Chapter 7.
Appendix
7.1 Firmware Updates
Eddy supports firmware update with Web or FTP. This section describes update method via FTP and
Telnet. Web update is described in
Chapter 5. Configuration via Web .
① Connect to Eddy with FTP, using correct username and password. (Default: eddy, 99999999)
② Issue a command ‘bin’ for binary file transfer mode. Optionally use ‘hash’ to see the data transfer
mark.
③ Issue ‘put’ command upload the firmware file.
④ After getting a ‘Transfer complete’ message, issue a command ‘quit’ or ‘bye’ to disconnect. Now
we are ready to update the firmware.
Figure 7-1 Firmware updates via FTP
7-1