TeeJet SmartPad II Lightshow User Guide - Manual (Page 11)

Page 11 of 11
Install Instructions for SmartPad II v 4.01
Required Files:
ltshow_spII.zip (extracts to: ltshow.exe, ltshow.lmf, ltshow.txt)
Instructions:
• Extract the zip file to a Compact Flash (CF) card. This will place a “Support” folder with
the necessary ltshow files at the root of the card.
• Insert the CF card into the Smart Pad II.
• Go to Tools, down arrow to the last item on the menu, it should be called “Light Show”.
• Select it and hit enter. Lightshow will run. Hit the escape key to exit Lightshow.
Notes:
• This version of Lightshow was created with the existing Smart Pad I executable for the
SP II environment.
• The ltshow.txt files you used with the SmartPad I version will work with the SmartPad II.
Commands and format are the same if you wish to construct new files.
• This temporary fix uses the same screen colors and dimensions as those on the SP I.
Therefore, this instance of lightshow is gray scale and will not cover the entire display.
• This version of lightshow does not support touch screen display.
• The touch screen still works in the area outside of the Lightshow window. Please do not
touch the screen outside of the Lightshow window or you will be required to power off
the SP II to turn off Lightshow.