TeeJet SmartPad II Lightshow User Guide User Manual
Page 5
Page 5 of 11
Example: "applied" - displays the APPLIED message in the lightbar screen.
Keyword: bnd_left
[OptParam1] None
[OptParam2] None
Definition: Displays the MAP BND left message/arrow, which are displayed in guidance when the user
to creating a boundary to the left of the vehicle.
Example: "bnd_left" - displays the MAP BND left message/arrow in the lightbar screen.
Keyword: bnd_right
[OptParam1] None
[OptParam2] None
Definition: Displays the MAP BND right message/arrow, which are displayed in guidance when the
user to creating a boundary to the right of the vehicle.
Example: "bnd_right" - displays the MAP BND right message in the lightbar screen.
Keyword: swath_num
[OptParam1] The swath number (negative for left). (integer)
[OptParam2] None
Definition: Displays the swath number message. This is the message presented to the user during
guidance if Swath # was selected in setup as a display message.
Figure 6: applied
Figure 7: bnd_left
Figure 8: bnd_right