TeeJet SmartPad II Lightshow User Guide - Manual (Page 6)

Page 6 of 11
Example: "swath_num 0" - displays BASELINE in the lightbar screen.
Keyword: speed
[OptParam1] The speed. Must be >= 0.
[OptParam2] 1 for MPH or 2 for KPH.
Definition: Displays the ground speed message. This is the message presented to the user during
guidance if Ground Speed was selected in setup as a display message.
Example: "speed 22.4 1" - displays 22.4 MPH in the lightbar screen.
Keyword: area
[OptParam1] The area. Must be >= 0.
[OptParam2] 1 for AC or 2 for HA.
Definition: Displays the area applied message. This is the message presented to the user during
guidance if Area Applied was selected in setup as a display message.
Example: "area 78.9 1" - displays 78.9 ac in the lightbar screen.
Keyword: heading
[OptParam1] The heading error. Must be between -180.0 and 180.0.
[OptParam2] None
Definition: Displays the heading error message. This is the message presented to the user during
guidance if Heading Error was selected in setup as a display message.
Example: "heading 90.0" - displays H 90.0 and arrow to right in the lightbar screen.
Keyword: heading_na
[OptParam1] None
[OptParam2] None
Figure 9: speed
Figure 10: area