Toa FS-971 SERIES - Manual (Page 11)

11
1. Strip the cable sheath 9 mm using the strip gauge
provided on the side of the terminal block.
2. Insert the cable into the terminal block.
• Solid cable
Fully Insert the cable into the hole in the terminal
block.
• Twisted cable
Press the lock switch on the terminal block, and
fully insert the cable. Then, release the switch
with the cable inserted.
When removing the cable, pull it out of the terminal
block while pressing the lock switch.
Note: Do not press the lock switch extremely
strong.
3. After connection completion, bundle cables
together using the cable clip, then fix the clip with a
screw.
If cables are too thick to be bundled together,
replace the cable clip with the supplied clip.
9 mm
Strip gauge
Lock switch
Cable clip
Note
Do not tighten the clip
extremely strong.
3.3. Connection of the RM-1200's Push-in Terminal Block