Crestron electronic STX-1700CXP - Manual (Page 19)

Crestron STX-1700CXP 2-Way RF Wireless Touchpanel
Operations Guide – DOC. 6144 2-Way RF Wireless Touchpanel: STX-1700CXP • 15
C2Net Device, Slot 9
Double-click the TPS-RFGWX icon in the upper pane to open the “Device Settings”
window. This window displays TPS-RFGWX device information. Select the Net ID
tab to change the gateway Net ID, as shown in the following graphic.
“Device Settings” Window for the TPS-RFGWX
Similarly, expand the system tree in the lower pane and double-click the STX-
1700CXP icon to open the “Device Settings” window for the touchpanel. Select the
RF/IR ID tab to change the touchpanel RF ID, as shown below. For more information
on setting the RF/IR ID, refer to “RF Setup” shown on page 9.
Touchpanel “Device Settings” Window
STX-1700CXP Symbol in Programming Manager
Programming Manager is where programmers “program” a Crestron control system
by assigning signals to symbols. The graphic after this paragraph shows the STX-
1700CXP symbol in the SIMPL Windows’ Programming Manager.