Crestron electronic STX-1700CXP - Manual (Page 8)

2-Way RF Wireless Touchpanel Crestron STX-1700CXP
4 • 2-Way RF Wireless Touchpanel: STX-1700CXP Operations Guide - DOC. 6144
1. Battery life is 180 minutes continuous usage with background lighting at full brightness. Actual
operating time depends on usage and settings for background brightness and timeouts.
2. Requires Crestron TPS-RFGWX 2-Way RF Gateway/Transceiver. The RF signals can travel from a
minimum of three feet up to a maximum between 100 - 200 feet; the range is dependent on construction
of the building, obstructions, and RF interference from other devices. The location of the TPS-RFGWX
and the orientation of the antenna are also important factors in the RF performance.
3. Refer to “Identity Codes” on page 7 for details.
4. The latest versions can be obtained from the Downloads | Software Updates section of the Crestron
website (
www.crestron.com) . Refer to NOTE after last footnote.
5. Crestron 2-Series control systems include the AV2, AV2 with Card Cage, CP2, CP2E, PAC2, MC2W,
MC2E, MP2, MP2E, PRO2, and RACK2.
6. CNX update files are required for either CNMSX-AV/Pro or CNRACKX/-DP. Filenames for CNX
update files have a UPZ extension and are in one EXE or zipped UPZ file. To avoid program problems,
make certain you are using the update file with the correct suffix letter (e.g., S, V, W, X).
7. In DETAILS, projectname represents the assigned project name, and vx.xxx.x represents a version
number.
8. The weight listed for the touchpanel does not include the ST-BTPN, ST-DSN or external power pack.
NOTE: Crestron software and any files on the website are for Authorized Crestron
dealers and Crestron Authorized Independent Programmers (CAIP) only. New users
may be required to register to obtain access to certain areas of the site (including the
FTP site).
Physical Description
The touch-sensitive viewing screen and “quick” pushbuttons are located on the front
of the STX-1700CXP. The electronic hardware is housed in a high impact, black
molded plastic enclosure, shown below. Connectors to upload touchscreen projects
via Cresnet, using a PC and Crestron processor, and to power the unit using the
external power pack are located on the left and right sides of the unit, respectively.
Refer to illustrations on the next page.
Physical View of STX-1700CXP